A few simple experiments using the music from an audio system to stimulate the brain, will reveal that highly refined metals such as Silver, Tin and Copper have now acquired, by way of a "morphic resonance chain", energy patterns that produce an extreme adverse reaction within human beings. The same adverse energy patterns have now become associated with many other materials and the A.C. supply itself has a continuous varying energy pattern which contains the adverse energy messages acquired originally from such events occurring as meat being preserved within Tin coated containers. Nature's "morphic resonance chains" are extremely active and contain many links.
P.W.B. "Smart Metal" consists of a special type of solder which contains a high proportion of Tin and a significant amount of Silver. Silver and Tin have now acquired a high propensity to absorb 'morphic messages". We have induced, within this material, a long sequence of highly beneficial morphic messages. The P.W.B. "Smart Metal" has acquired the ability to transfer the beneficial morphic messages to any previously soldered joint when a small amount of the "Smart Metal" is fused onto the previous (adverse) joint.
It is not intended that the new P.W.B. "Smart Metal" should be used in the normal soldering process. All that is necessary is to make joints using conventional solder and to then apply a small amount of the "Smart Metal" to the previously made joint. It is not necessary to treat every soldered joint in a piece of equipment. The act of applying "Smart Metal" under the thermal activity produced by a soldering iron, activates long stretches of wiring. The beneficial effect of treating one soldered joint within a piece of equipment has to be experienced to appreciate the effectiveness of this technique.
NOBODY SHOULD REMOVE THE PROTECTIVE COVERS FROM ANY ELECTRICAL EQUIPMENT WITHOUT POSSESSING THE NECESSARY SKILLS AND KNOWLEDGE TO DO SO. IT IS POTENTIALLY DANGEROUS TO WORK WITHIN THE INSIDE OF ELECTRICAL EQUIPMENT. IF NECESSARY, OBTAIN THE HELP OF A SKILLED ELECTRONICS ENGINEER.
ALWAYS DISCONNECT ELECTRICAL EQUIPMENT FROM THE A.C. SUPPLY SOCKET BEFORE REMOVING THE PROTECTIVE COVERS.
After treating a few soldered joints with P.W.B. "Smart Metal", the beneficial effects become readily apparent. It is difficult to recommend which particular soldered joints within any particular item of audio equipment should be treated first. Treating any previously soldered joint produces immediate results and our only recommendation would be to treat joints which are easily accessible, irrespective of their position within the electronic circuit. Treating the connections to a loudspeaker drive unit is particularly effective. Where access to interconnecting lead terminations are accessible, these should be treated with P.W.B. "Smart Metal".
A treatment that we particularly recommend is to solder a small section, at the extreme end of the brass connecting pins on the A.C. power plug. After soldering the end of the pin with conventional solder, treat the end of the pin with P.W.B. "Smart Metal".
This effective treatment can be extended to treating the metal end cap of a fuse and a small area of the fuse holder can be treated with P.W.B. "Smart Metal". The wire ends which connect to the mechanical screw joint within the A.C. connecting plug should first be soldered with conventional solder and then treated with P.W.B. "Smart Metal".
It is well worth treating all the A.C. plugs and connecting wire end terminations throughout the audio equipment and if video or computer equipment is situated anywhere within the owner's occupied territory within a building, the connecting power plugs on that equipment should also be treated. Most termination plugs on radio and television aerial interconnect wires are terminated by soldered connections. Treating these connecting plugs with P.W.B. "Smart Metal" is very beneficial.
If the soldering iron is beneficially treated before P.W.B. "Smart Metal" is applied to electronic equipment, a far greater beneficial effect will be achieved. Ideally, treating a soldering iron requires access to a further soldering iron so that one soldering iron can be used to treat the connecting plug and wires of the other soldering iron. Where only one soldering iron is available, it is well worth treating a spare power connecting plug and then attaching the treated plug to the soldering iron. A cold or hot soldering iron, present within a building, emits a chronic adverse energy pattern. Always melt a small amount of P.W.B. "Smart Metal" onto the bit after using conventional solder. This leaves the cold soldering iron bit 'treated' with P.W.B. "Smart Metal".
Illuminating a room with electric light produces an incredible amount of photon particle activity which enters into every object within the room. Normal electrical light activity produces a very adverse reaction to all objects within a room, fortunately it is relatively easy to manipulate the electrical light source to produce a powerful stream of beneficial energy.
It is necessary to start with an easily accessible electrical light fitting such as a table lamp and to have access to two electric light bulbs which will fit the unit. By far the most effective light bulbs are the ones that contain a white coating on the inside of the glass envelope. Older type, non coated light bulbs are much less effective. The filaments within the bayonet type light bulbs are terminated in two large sections of solder. Both of these solder connections should be treated with P.W.B. "Smart Metal". Screw termination light bulbs have one large solder end termination and a smaller termination attached to the metal end cap. Both these terminations should be treated with P.W.B. "Smart Metal". One light bulb should first be treated and then fitted into the light fitting and illuminated. The second light bulb should then be treated, with the room illuminated by the previously treated bulb. Change the light bulb over. The treatment should be applied to the first bulb with the room now illuminated by the second 'treated' bulb. It should be noted that even with the room fully illuminated with daylight, a treated electric light produces a stream of energy which is absorbed by every item within the room. The more light bulbs that are treated throughout the building, the greater the beneficial effect within any one room.
If the new P.W.B. Morphic Liquid is available, the liquid should be applied to the glass and metal components of the light bulb and thoroughly dried before use. Naturally, the A.C. connecting plug of the electrical light fitting should be treated as previously described. We have investigated the efficacy of photon particles contained within sunlight. Whilst direct sunlight, in the open air, has a beneficial effect whilst applying P.W.B. photon sensitive treatments, sunlight entering a room via glass windows is distorted and produces an adverse effect. At all times, glass windows should be treated with P.W.B. Morphic Liquid.
* * * * * * * * * * * *
Over the past few years, we have introduced a number of procedures where the techniques were so simple to apply that, because of the strangeness of the techniques, large numbers of people did not attempt to evaluate them. We are now about to describe another simple procedure which, if it is applied to a loudspeaker drive unit, the treated drive unit will, in all probability, based on a subjective perceived sound test, outperform any non treated drive unit available anywhere in the world, irrespective of the initial cost.
With the discovery that Silver and Tin are capable of absorbing multiple beneficial "morphic messages", we have now developed a technique that allows us to solve a serious problem within loudspeaker drive units. The magnetic assembly of a loudspeaker drive unit is an extremely powerful source of concentrated energy and has, until now, resisted all our efforts to control the energy pattern or to induce beneficial patterns into the magnetic structure.
We must emphasise that P.W.B. "Smart Metal" bears no resemblance to the original lead/tin/silver solder. The material has received extensive treatments and is now a metal of great complexity which contains a large number of stored energy messages. These 'messages' are easily transferred from the metal to a magnetic structure.
All that is necessary to produce a fundamental change to the perceived performance of a loudspeaker drive unit is to lay the end 3-4mm of the P.W.B. "Smart Metal" onto and in direct contact with the outside of the loudspeaker magnetic ring. With a soldering iron, preferably one treated as previously described, melt through the P.W.B. "Smart Metal" so that the iron briefly touches the face of the magnet. Remove the soldering iron and the beneficial 'messages' within the "Smart Metal" will have been transferred to the magnetic structure. It is not intended that any of the P.W.B. "Smart Metal" should remain attached to the magnet and any debris that is left is easily removed by scraping it with a fingernail.
The only parts of the loudspeaker drive unit which should be touched with the soldering iron after treating the magnet are the solder tags which connect the signal wire. If any other part of the loudspeaker drive unit is accidentally touched with the soldering iron, it will probably become necessary to again treat the magnetic structure. A very effective extension of this technique is to apply the 'morphic message' information to the magnetic structure in four places, spaced at 90 degree intervals.
Untreated loudspeaker drive units, situated within any rooms of the occupied territory, will affect all other adjacent rooms. We would like to emphasise again that all human beings are extremely territorial and are fully aware, at all times, of the location of their own personal territorial boundary.
A problem exists within buildings when steel objects such as central heating radiators are installed. The ability to manipulate magnets provides an ideal solution to this particular problem. It is possible to purchase from stationery or hardware or furniture shops small, hard magnets fitted into small plastic housing. They are intended to be used to trap paper messages to steel boards or refrigerators. The soft plastic magnetic assemblies are not suitable for this treatment. The magnet assembly is treated exactly as the loudspeaker magnet. Lay the end 3-4mm of the P.W.B. "Smart Metal" onto the magnet, melt through with the soldering iron, allow the iron to briefly touch the magnet and then immediately remove the iron. Attach a treated magnet to a radiator in each room. Attach further treated magnets to the steel cold water storage tank, the refrigerator, deep freezer, side of the electric fire, side of the gas fire etc. etc. or any other steel structure.
The small round treated magnets, for applying to steel structures around the building, can also have, for greater effect, the four 90 degree 'morphic message' entry points applied at the periphery of the circular face.
We also recommend experimenting by attaching treated magnets to the iron frame of a piano.
At any time, the beneficial 'morphic message' energy pattern can be cancelled and the magnetic structure or the soldered electrical joint within equipment can be returned to its previous adverse state by melting conventional (untreated) solder onto the magnetic structure or treated electrical joint. Re-treating with P.W.B. "Smart Metal" immediately restores the beneficial pattern.
To P.W.B. devices which beneficially respond to the application of "Smart Metal" are Garment Pins and any other P.W.B. device based on a safety pin, particularly a Black Tie Pin fitted to window curtains. The other device is any P.W.B. device based on crocodile clips.
The pin should have a small amount of "Smart
Metal" fused as illustrated.
The crocodile clip should have any previously soldered area treated with "Smart Metal".
********************************************
One of the most surprising, inexpensive devices that we have recently introduced is the “Smart Metal” treatment which is applied to inexpensive permanent magnets. Judging from the number of people who have enquired from us where to purchase these small magnets, we can only assume, because of the difficulty people have had in locating these magnets, that a number of people have not yet had the opportunity to evaluate this very effective, inexpensive device.
When a magnet 'treated' with "Smart Metal" is attached to any steel object, such as a central heating radiator, the outer steel case of an electrical or gas appliance, cold water storage tank etc. etc., situated anywhere within the occupied building, the perceived sound within a building is significantly improved.
The small magnets can be purchased from Craft shops. This is the type of shop which sells supplies for making your own jewellery, for making lampshades, baskets, models etc.
The price of the magnets is usually £1.20 for a packet containing 12 magnets.
We think that when you experience the beneficial effect of these treated magnets, you will agree with us that it is well worth the time and trouble to locate a stockist of them in your area, so that you can treat a quantity of them for yourself.
After being treated, the magnets appear to be capable, if necessary, of being painted with any decorative colour.
© P.W.B. Electronics 2001